A short outage can turn a home office, router, or desktop PC into the weak point in an otherwise sensible backup plan. APC vs CyberPower UPS choices are really about the equipment you need to bridge safely: a computer that needs clean shutdown time, a modem that keeps the household connected, or a small electronics stack that should ride through brief utility drops without drama.
Quick Buying Links
APC by Schneider Electric APC Back-UPS Pro, 1500VA, Tower, 120V, 10 NEMA 5-15R outlets, LCD, 1 USB Type C + 1 USB Type A ports
The APC BN1500M2 remains a sensible UPS for lighter electronics support when 900W is enough, six battery-backed outlets cover the protected devices
CyberPower PFC Sinewave CP1500PFCLCD
Stronger for active-PFC computers, more plug positions, sine-wave battery output, and loads above APC’s 900W rating
Both models here are line-interactive 1500VA UPS units for standard 120V household circuits. They are not whole-home backup, and they are not long-duration appliance backup. The useful question is narrower and more practical: which one gives your electronics the better margin?
The big picture
The APC Back-UPS Pro BN1500M2 and CyberPower PFC Sinewave CP1500PFCLCD share the same apparent output capacity: 1500VA. They both use a NEMA 5-15P input plug, both provide six battery-backed outlets, both include USB Type A and Type C charging, both have LCD status displays, and both carry a 3-year warranty according to their current official product pages.
The meaningful differences sit in places that matter during a blackout: watt capacity, on-battery waveform, total outlet count, surge rating, and transfer time. CyberPower has the stronger current official watt rating at 1000W versus 900W for the APC. CyberPower also specifies sine-wave battery output, while the APC specifies a stepped approximation to a sinewave.
For many households, that makes the CyberPower the cleaner fit for a desktop computer, workstation, networking shelf, or home entertainment stack where waveform and headroom matter. The APC still makes sense for a more basic electronics backup role where 900W is enough and six battery-backed outlets cover the essentials.
Side-by-side comparison for outage planning
- UPS class: Both are line-interactive UPS units with battery backup and surge protection for electronics.
- Rated output capacity: APC BN1500M2 is rated at 1500VA / 900W. CyberPower CP1500PFCLCD is rated at 1500VA / 1000W.
- Input and outlet standard: Both are standard US 120V UPS units using NEMA 5-15 household connections.
- Battery-backed outlets: Both provide six outlets with battery backup and surge protection.
- Total outlets: APC provides 10 total NEMA 5-15R outlets. CyberPower provides 12 total NEMA 5-15R outlets.
- Surge-only outlets: APC has four surge-only outlets. CyberPower has six surge-only outlets.
- On-battery waveform: APC specifies stepped approximation to a sinewave. CyberPower specifies sine wave.
- Transfer time: APC lists 8 ms typical and 10 ms maximum. CyberPower lists 4 ms.
- Surge rating: APC lists 1080 J. CyberPower lists 1445 J surge suppression.
- Display and USB: APC has an LCD display and USB Type A plus Type C. CyberPower has a multifunction color LCD and one Type A plus one Type C USB charging port with 3.1A shared.
- Energy efficiency listing: APC is listed as ENERGY STAR UPS V2.0 USA. CyberPower is listed as ENERGY STAR certified.
Where the CyberPower CP1500PFCLCD pulls ahead
The CyberPower CP1500PFCLCD has three verified advantages that are easy to understand in real household use: 1000W output capacity, sine-wave battery output, and 12 total outlets. Those differences are not cosmetic. They change how much room you have when several electronics are connected and how comfortable the UPS is for equipment with active-PFC computer power supplies or other sensitive AC waveform requirements.
The watt difference matters most when your load is near the APC unit’s 900W rating. A UPS is not something to run right at the edge during a stressful outage. If your desktop, monitor, network gear, and peripherals push the load upward, CyberPower’s manufacturer-stated 1000W rating gives more stated headroom than APC’s 900W rating.
The waveform difference is the other central point. CyberPower specifies sine wave on battery. APC specifies a stepped approximation to a sinewave. For a simple modem, router, or small electronics bundle, that may not be the deciding factor. For a computer-focused setup, it becomes much more important because the supplied evidence specifically flags active-PFC power supplies and sensitive AC waveform requirements as a place where the sine-wave distinction matters.
CyberPower also gives you more plug positions: 12 total outlets compared with 10 on the APC. Both have six battery-backed outlets, so the extra CyberPower outlets are surge-only positions. That is still useful for accessories that need surge protection but do not deserve battery runtime during an outage.
Where the APC BN1500M2 still fits well
The APC BN1500M2 is not outclassed for every home. It matches CyberPower on the 1500VA label, provides the same count of six battery-backed outlets, includes USB Type A and Type C charging, uses standard 120V household connections, includes an LCD, and carries the same 3-year warranty length.
That makes it a reasonable fit for a modest electronics backup station: router, modem, small desktop accessories, a monitor you want to shut down cleanly, or a low-drama home office arrangement that stays within its 900W rating. It also gives four surge-only outlets for devices that need protection but not battery support.
The main editorial caution is not about brand trust; it is about matching the unit to the job. The APC page’s stated waveform and 900W rating place it behind the CyberPower for higher-watt computer loads and waveform-sensitive use. For a lighter electronics bundle, those differences may matter less than layout, outlet needs, and whether six backed-up outlets cover your actual blackout priorities.
Runtime: useful, but not a fair headline winner here
UPS runtime is where comparison articles can get sloppy. The official CyberPower page lists runtime as 2.5 minutes at full load and 10 minutes at half load. The official APC page shows load-dependent runtime information, with the visible calculator result at 900W shown as 3 minutes 7 seconds. Those are different load points and different presentation formats, so they should not be treated as a direct half-load race.
The practical lesson is simpler: both are short-bridge UPS products. They are for riding through brief interruptions, keeping a router or modem alive for a limited window, or giving a desktop computer time for a controlled shutdown. They are not substitutes for a larger battery system or generator when the plan is to run appliances for hours.
If your main concern is keeping internet equipment alive during an outage, a UPS can be part of the plan, but the load is much smaller and more specific than a general home-office stack. For that scenario, see our guide to backup batteries for routers and modems during blackouts.
Which one belongs with which household setup?
For a desktop computer or workstation
CyberPower is the stronger pick on the verified facts. It has the higher watt rating, sine-wave battery output, faster stated transfer time, higher surge suppression figure, and more total outlets. Those are exactly the differences that matter when the UPS is protecting a computer setup rather than just a couple of low-draw devices.
For a basic internet and electronics corner
Either model can make sense because both are line-interactive UPS units with six battery-backed outlets, surge protection, LCD status information, USB charging, and standard 120V household compatibility. CyberPower still has the stronger specification sheet, but APC remains a practical option when the connected load stays comfortably within 900W and six backed-up outlets are enough.
For medical-adjacent backup planning
A UPS can help bridge brief interruptions for small electronics, but it should not be treated as a complete overnight medical-device power plan. If a CPAP machine is part of your household’s outage planning, build that plan around the device’s actual power needs and a longer-runtime strategy; our guide to powering a CPAP machine during an outage walks through that decision more directly.
For refrigerators, freezers, and essential circuits
Neither model is the right answer for long-duration appliance backup. Both are lead-acid UPS products intended for short bridging, shutdown, or small electronics support. If the goal is keeping a refrigerator, freezer, furnace controls, or selected household circuits going, move up to a more appropriate backup category and start with choosing a portable power station for essential circuits.
Common mistakes when choosing between these two UPS units
- Treating 1500VA as the whole story: Both units are 1500VA, but the watt ratings differ: 900W for APC and 1000W for CyberPower.
- Counting every outlet as battery-backed: Both have six battery-backed outlets. CyberPower’s extra outlet advantage is in total and surge-only outlet count.
- Using runtime numbers out of context: Manufacturer-stated runtime depends on load. The available official runtime information is not presented at matching load points.
- Ignoring waveform: CyberPower specifies sine wave on battery. APC specifies stepped approximation to a sinewave. That difference matters for active-PFC and waveform-sensitive computer setups.
- Planning for appliances with a UPS: These products are for electronics bridging and shutdown, not long-duration refrigerator, freezer, or whole-home backup.
Fast answers
Is the CyberPower CP1500PFCLCD more powerful than the APC BN1500M2?
Yes, by current official watt rating. Both are 1500VA units, but CyberPower is rated at 1000W while APC is rated at 900W.
Do both units provide the same number of battery-backed outlets?
Yes. Both provide six battery-backed outlets. CyberPower has more total outlets because it includes six surge-only outlets, while APC includes four surge-only outlets.
Which one is better for active-PFC computer power supplies?
CyberPower is the better fit on the supplied facts because it specifies sine-wave output on battery. The APC BN1500M2 specifies a stepped approximation to a sinewave.
Can either UPS run a home during an outage?
No. Both are 120V line-interactive UPS units for short electronics backup, not whole-home systems or long-duration appliance backup.
The practical recommendation
For most computer-centered blackout plans, the CyberPower CP1500PFCLCD is the clearer choice. Its 1000W rating, sine-wave battery output, 12 total outlets, 4 ms stated transfer time, and 1445 J surge suppression give it the stronger specification set for workstations, active-PFC computers, networking equipment, and mixed electronics shelves.
The APC BN1500M2 remains a sensible UPS for lighter electronics support when 900W is enough, six battery-backed outlets cover the protected devices, and a stepped approximation waveform is acceptable for the equipment being powered. It is best viewed as a capable short-bridge UPS, not a substitute for larger outage power.
Put plainly: choose CyberPower when the load is computer-heavy, outlet-dense, or waveform-sensitive. Choose APC when the setup is lighter, simpler, and comfortably inside the 900W rating. That is the cleanest APC vs CyberPower UPS decision for a real home outage plan.
Quick Buying Links
APC by Schneider Electric APC Back-UPS Pro, 1500VA, Tower, 120V, 10 NEMA 5-15R outlets, LCD, 1 USB Type C + 1 USB Type A ports
The APC BN1500M2 remains a sensible UPS for lighter electronics support when 900W is enough, six battery-backed outlets cover the protected devices
CyberPower PFC Sinewave CP1500PFCLCD
Stronger for active-PFC computers, more plug positions, sine-wave battery output, and loads above APC’s 900W rating




